Milesight industrial cellular routers, outdoor 5G CPE and Hongdian vehicle gateways supplied with practical pre-sales guidance for CCTV, ANPR, parking, transport and connected infrastructure projects.
Connected IoT helps system integrators compare cellular technology, local interfaces, PoE direction and capacity, antenna arrangements, environmental limits and remote-management requirements. We supply project quantities, confirm the appropriate UK/EU order variant and provide straightforward guidance before deployment.
For higher-bandwidth video, resilient primary connectivity and modern Gigabit networks.
High-performance 5G SA/NSA router with dual SIM, five Gigabit Ethernet ports, standard Wi-Fi 6 and GNSS, plus serial and isolated I/O. Four-port PoE is available on selected variants.
IP67 outdoor 5G CPE with a 2.5 Gigabit WAN/LAN port, a Gigabit LAN port, internal cellular antennas and 802.3at PoE input. Wi-Fi 6 is optional.
Compact and multi-port options for dependable cellular backhaul, serial equipment and remote management.
Dual-SIM LTE Cat 4 router with two Fast Ethernet ports, serial connectivity and isolated I/O. PoE, Wi-Fi and GNSS depend on the selected order variant.
Dual-SIM LTE Cat 4 router with five Fast Ethernet ports, separate RS232 and RS485 interfaces and isolated I/O. Selected variants add four PoE outputs.
Ultra-compact single-port routers with low-power standby and wake functions. UR41 provides LTE Cat 4 and GNSS; UR41L provides LTE Cat 1 without GNSS.
Vehicle-focused cellular hardware with M12 connectivity, CAN or PoE options for transport and mobile deployments.
Vehicle gateway available with single or dual 5G modules, M12 Gigabit Ethernet, Wi-Fi 6, four serial interfaces and two CAN 2.0 connections. Cellular-module and regional compatibility must be confirmed per project.
LTE Cat 4 router for ANPR, CCTV, transport and remote cabinets, with dual SIM and four Fast Ethernet ports. PSE variants provide four 30 W PoE+ outputs; full PoE+ operation requires the manufacturer-specified 132 W adaptor, while serial, GNSS and Wi-Fi configuration depends on the selected CSWG or C2W2 variant.
Features shown as optional must be confirmed against the exact order code before purchase.
| Model | Cellular | Local networking | Power / PoE | Best starting point for |
|---|---|---|---|---|
| Milesight UR32 | LTE Cat 4, dual SIM | 2 × Fast Ethernet | 9-48 V; optional 2-port PoE PSE | Compact CCTV, parking and control cabinets |
| Milesight UR35 | LTE Cat 4, dual SIM | 5 × Fast Ethernet | 9-48 V; optional 4-port PoE PSE | Multi-device and multi-camera sites |
| Milesight UR41 | Cat 4 UR41 / Cat 1 UR41L | 1 × Fast Ethernet | 5-24 V or USB-C power; no PoE | Low-power and space-constrained equipment |
| Milesight UR75 | 5G SA/NSA, dual SIM | 5 × Gigabit Ethernet, Wi-Fi 6 | 9-48 V or USB-C; optional 4-port PoE PSE | High-bandwidth CCTV and modern networks |
| Milesight UF51 | 5G SA/NSA, single SIM | 2.5GbE + Gigabit LAN | 9-48 V or 802.3at PoE PD input | Outdoor mounting and integrated antennas |
| Hongdian H6700 | Configurable 1/2 × 5G or LTE | 4 × M12 Gigabit Ethernet, Wi-Fi 6, CAN | 9-36 V; no PoE claim | Rail, tram, bus and specialist vehicles |
| Hongdian H7960 | LTE Cat 4, dual SIM | 4 × Fast Ethernet, variant-dependent serial/GNSS | 9-54 V; PSE models offer 4 × PoE+ | ANPR, CCTV and PoE-equipped remote or vehicle sites |
Model selection should include remote-management, VPN, software lifecycle and exact regional-order-code requirements—not only modem speed. Milesight publishes security and vulnerability-management resources through its Trust Center.
View Milesight Trust CenterSend us the application, interfaces, quantity and deployment timetable for a practical recommendation.
Request technical guidance